High-hiding Non-bridging Premium Plus Vinyl Flat Finish Supplier in China
High-hiding Non-bridging Premium Plus Vinyl Flat Finish paint coating manufacture Shenzhen China  
Home About Us Products Contact Us

 

 




Honest Joy Coating & Paint
Vinyl Coating

Vinyl Fouling Topcoat
Vinyl-Aliphatic Urethane Primer and Finish Coat
Vinyl Wash Primer
Vinyl Red Oxide Primer

Vinyl Intermediate Coating
Vinyl Anti Fouling Topcoat
Vinyl Acrylic Based Exterior Flat Finish
Thin-Film Vinyl Ester Coating
Thick Vinyl Ester Coating
Solvent-thinned Chlorinated Vinyl Toluene-acrylate Low Lustre Coating
Self-etching Zinc Chromate Pigmented Vinyl Wash Primer

Reinforced Trowel Applied Vinyl Ester Lining
Premium Quality Full-bodied Smooth-flowing Vinyl-acrylic Primer
Abrasion Resistant Vinyl Ester Coating
Catalyzed Vinyl Ester Primer
Chlorinated Vinyl Toluene-acrylate Low Lustre Coating

High-hiding Non-bridging Premium Plus Vinyl Flat Finish
Catalyzed Vinyl Ester Primer
Epoxy Vinyl Primer

  

High-hiding Non-bridging Premium Plus Vinyl Flat Finish

PRODUCT SPECIFICATIONS:

Description
A high-hiding, non-bridging premium plus vinyl flat finish
for interior acoustical ceilings. Designed to preserve
existing sound deadening qualities. Not recommended
for wall surfaces.
Recommended Uses
New or previously painted acoustic tile or spray applied
acoustic ceilings.
Colors
White and Off-White
Packaging
One and five gallon containers
Finish
Flat, sheen @ 60° = 2.6 – 3.0%
Surface Preparation
Surfaces must be clean, dry and free from all contaminants
that may impair adhesion. Glossy or slick surfaces
must be scuff sanded prior to application of paint coatings.
Primer
Water and smoke damage must be primed with 40
Terminator II.
Application
Brush, roll or spray. Ambient and surface temperatures
must be above 55°F and relative humidity below 80%.
Light overspray can be cleaned up with water even after
drying. Clean tools and equipment with soap and water.
Drying Time
Touch: 30 minutes
Recoat: 4 hours
Coverage
50 – 400 square feet per gallon, depending on surface.
Mil Thickness
Wet = 5.2 Dry = 1.5
Thinning
Use at package consistency. If thinning is required,
use water sparingly (1/2 pint of water per gallon).
Composition
TOTAL PIGMENT 42.0%
Titanium Dioxide 3.4%
Extenders 38.5%
TOTAL VEHICLE 58.0%
Vinyl Acrylic 3.9%
Additives 7.7%
Water 46.4%
Weights & Measurements +/-3.0%
Solids by Volume: 29.0%
Solids by Weight: 47.0%
VOC: 31 g/l
Weight Per Gal: 11.3 lbs.
Viscosity: 94 KU

 



Contact Us
 
Honest Joy Coating & Paint. All rights reserved.